What are the differences between ground paving stones and ordinary imitation stone bricks? Do you understand this question?
1. Different materials and production processes
Floor paving stone (ceramic PC brick) is made of high-quality ceramic raw materials, which are sintered into shape through secondary cloth, and have better performance than ordinary imitation stone bricks. Ordinary imitation stone brick is a type of polyurethane and cement pressed brick, which is a colorless and amorphous thermoplastic material.

2. Different surface textures
Both are imitation stone bricks, but the surface texture of the floor stone is closer to that of stone.
3. Different carrying capacities
The thickness of ordinary imitation stone bricks should be at least 30mm. If it meets the needs of pedestrians, the thickness should be at least 50mm. The traditional thickness of ground paving stone is 15mm, which can be used for sidewalks. The thickness is 18mm, which exceeds 30mm and meets the needs of most vehicles. In addition, during use, the loss rate is very low, which is highly welcomed by engineering projects.
4. Different prices
If it is a simple floor stone (ceramic PC brick) with the same thickness specification, compared with ordinary imitation stone bricks, the floor stone will be slightly higher than ordinary imitation stone bricks. If compared with the comprehensive maintenance in the later stage of actual laying, the cost of laying stone (ceramic PC bricks) on the ground is much higher than that of ordinary imitation stone bricks.
5. Different environmental protections
Laying stones on the ground fully utilizes waste resources, reduces resource shortages and natural environmental damage, conforms to the national energy conservation and emission reduction strategy, carefully selects raw materials, and can be used with confidence,
At the same time, due to the scientific selection of the fabric, the sustainable production of the product is fundamentally guaranteed for the stone floor tiles.